Item # MS-400G, MIL-PRF-24667B High Solids Non-Slip Deck Coating Type I Comp G on AST ACME, Inc.

		Call Us: 502-583-8355 \| Email: info

Learn more About
AST Acme, Inc.
-Typical Application
-Tank Linings
-Service Package
-Safety
-Capabilities
-Experience

Printable Page Email

Email This Page

Save To Favorites


	Item # MS-400G MIL-PRF-24667B High Solids Non-Slip Deck Coating Type I Comp G

Save To Favorites

MS-400G is a high solids, two-part, general purpose non-slip deck coating designed to provide maximum wear & impact resistance on U.S. Naval vessels.

Specifications

V.O.C.		0.9 lb/gal 114 g/L

Volume Solids		86 %

Pot Life		2 hours @ 70°F (21°C)

Hard Dry		24 hours @ 70°F (21°C)

Cure Time		4 days @ 70°F (21°C)

Estimated Coverage Roller		20 - 30 ft²/gal

Estimated Coverage Notched Towel		18 - 22 ft²/gal

Weight		18.7 lb/gal 2.3 kg/L

Flash Point		102 ºF-CC 39 ºC-CC

Coefficient of Friction (IAW MIL-SPEC)		Dry -0.99 Wet -0.94

Packaging		5 gallons in 6 1/2 gal kit

Standard Color		Dark Gray (36076)

Surface Preparation

Grit-blasting to SA 2.5 (near white metal) or SSPC-SP10 is the preferred method of cleaning and results in the best surface for adhesion.
Where grit-blasting is not feasible, power tool cleaning utilizing power sanders fitted with #16 grit aluminum oxide sanding discs can produce a sufficiently clean surface provided cleaning is carefully and intensively done.
If there is oil or grease on the surface, it must be removed prior to cleaning. The preferred method is to scrub with a strong detergent and flush area thoroughly while still wet. An alternative method is to remove the grease or oil with a solvent such as xylene. Solvents are flammable and must be handled with care. It is important that the solvent not be allowed to evaporate during the cleaning process and redeposit grease or oil on the deck.