Item # 32219TPX-T2/06480CMU, MIL-PRF-85285D Two Component Tan Flat High Solids Urethane Type II on AST ACME, Inc. AST ACME, Inc. - Item # 32219TPX-T2/06480CMU, MIL-PRF-85285D Two Component Tan Flat High Solids Urethane Type II

Home | About Us | Contact Us

AST Acme, Inc. - High Performance Coatings & Sheet Linings

Call Us: 502-583-8355 | Email: info

Coating Products:
Industrial Coatings
Military Coatings
Heavy Zinc Phosphate
Fluoropolymer Coatings
Rubber & Tank Linings
Press Releases
 
Learn more About
AST Acme, Inc.
-Typical Application
-Tank Linings
-Service Package
-Safety
-Capabilities
-Experience		 
Search Catalog
      GO   
 All Categories    MIL-PRF-85285D Two Component Tan Flat High Solids Urethane Type II
All Categories > Military Coatings > MIL-PRF-85285D Two Component Tan Flat High Solids Urethane Type II > Item # 32219TPX-T2/06480CMU  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Information

Item # 32219TPX-T2/06480CMU, MIL-PRF-85285D Two Component Tan Flat High Solids Urethane Type II


    Email Email This Page  
    Save To Favorites Save To Favorites
  

Two Component Tan

larger image
Fed. Std. 595 Color #33446
URA-ZEN is the trade name for Hentzen's two-component urethane coatings. This 2.8 VOC coating conforms to MIL-PRF-85285D Type II. It exhibits excellent chemical resistance, outstanding toughness, flexibility, abrasion resistance, and excellent outside durability.



32219TPX-T2 #33446 Tan Flat High Solids Urethane Component A · 06480CMU High Solids Ura-Zen Catalyst - Component B · Admixed Characteristics · Cure Schedule - Air Dry @ 77° & 50% Relative Humidity · Environmental Report · Handling & Storage · Directions For Use · Precautions & Safety · Clean-Up

32219TPX-T2 #33446 Tan Flat High Solids Urethane Component A

Weight

10.64 ± 0.35 lb/gal

Weight Solids

61.88% ± 1.0

Volume Solids

43.74% ± 1.0

Viscosity

70-80 KU's

06480CMU High Solids Ura-Zen Catalyst - Component B

Weight

9.36 ± 0.25 lb/gal

Weight Solids

90.00 %

Volume Solids

87.42 %

Admixed Characteristics

Catalyzation Ratio

3:1 by volume

Weight

10.32 ± 0.35 lb/gal

Weight Solids

68.26% ± 1.0

Volume Solid

54.64% ± 1.0

VOC

2.70 theo

Viscosity

20 - 30" @ #4 Ford

Theoretical Coverage sq. ft./gl. @ 1.0 mil dry Film Thickness

876.3

Usable Pot Life

4 h

Cure Schedule - Air Dry @ 77° & 50% Relative Humidity

Set

<2 h

Dry Hard

<8 h

Full Cure

3 weeks

Gloss @ 60°

<5 @ 2.0 mil

Environmental Report

Volatile Content Weight

31.74 %

Organic Volatile Content Weight

23.21 %

Exempt Solvent Weight

8.53 %

Exempt Solvent Volume

11.33 %

VOC Minus Water

<2.80

Handling & Storage
    The containers should be stored away from direct sunlight and heat. Freezing is not harmful if reheated gently to room temperature prior to use.

Directions For Use
    Component A should be thoroughly agitated prior to blending. After agitating Component A, mix 3 volumes of Component A to 1 volume of Component B and mix well. The material is now ready to use. Mix only what you will use in 4 hours. After that time, the product will start to rise in viscosity and eventually gel.

Precautions & Safety
  • Do not spray without adequate ventilation.
  • Read all container labels.
  • Read Material Safety Data Sheet.

Clean-Up
    Clean equipment immediately after use with 00053SST-1 or equivalent urethane reducer or solvent.

Request Information

Military Coatings
MIL-PRF-23377D, E & F Type I Class 1 Epoxy Primer
MIL-PRF-24635C Silicone Alkyd Enamel
CS 3204 Aircraft Integral Fuel Tank Sealant
MIL-PRF-22750F High Solids Epoxy Topcoat
MIL-P24441B, Type III Epoxy Polyamide
MIL-PRF-24667B High Solids Non-Slip Deck Coating Type I Comp G
MIL-24441 Type III Epoxy Polyamide
MIL-PRF-85285D Ordnance High Solids Polyurethane, Type 2, Class H
Concrete Saver® Anti-Slip Floor Coatings Heavy Vehicle Grade AS9100 System
Light Gray Silicone Alkyd Enamel, Type ll. Class 2, Grade B
MIL-PRF-85285D Two Component Tan Flat High Solids Urethane Type II
AST Acme, Inc. | 728 South 13th Street | Louisville, Kentucky, USA  40210
Phone: 502-583-8355 | Fax: 502-583-2290 | E-mail: info | Privacy Policy | Site Map