AST ACME, Inc. - MIL-PRF-23377D, E & F Type I Class 1 Epoxy Primer
Home
|
About Us
|
Contact Us
Call Us: 502-583-8355 | Email:
info
Coating Products:
Industrial Coatings
Military Coatings
Heavy Zinc Phosphate
Fluoropolymer Coatings
Rubber & Tank Linings
Press Releases
Learn more About
AST Acme, Inc.
-Typical Application
-Tank Linings
-Service Package
-Safety
-Capabilities
-Experience
Search Catalog
By Keyword
By Item #
All Categories
MIL-PRF-23377D, E & F Type I Class 1 Epoxy Primer
All Categories
>
MIL-24441 Type III Epoxy Polyamide
>
Fluoropolymer Coatings
>
MIL-P24441B, Type III Epoxy Polyamide
>
MIL-PRF-23377D, E & F Type I Class 1 Epoxy Primer
>
View Items
Printable Page
Email This Page
Save To Favorites
MIL-PRF-23377D, E & F Type I Class 1 Epoxy Primer
Check up to five results to perform an action.
larger image
The 02Y024 and 02Y037 chemically cured, two-component, conventional solids, epoxy-polyamide primers for application on aircraft and aerospace equipment. Component A contains the pigment and epoxy resin. Component B is a clear, non-pigmented polyamide component, which acts as a hardener or curing agent for Component A. When these epoxy primers are used over properly prepared substrates, they provide a corrosion inhibiting, chemical and solvent resistant film suitable for topcoat. The cured primers are resistant to immersion in water, jet fuels, lubricating oils and hydraulic fluids.
Results per Page :
25
50
100
200
Results 1 - 2 of 2
1
Item #
Item Name
Application
Color
Mix Ratio, by Volume
Reducer
Induction Time
Recommended Dry Film Thickness
02Y024
02Y024 Epoxy Primer
All types of Conventional Spray
Yellow
1 parts base to 1 part catalyst
IS-237
No induction necessary
0.6 - 0.9 mil
02Y037
02Y037 Epoxy Primer
Conventional and Electrostatic Spray
Yellow
1 parts base to 1 part catalyst
IS-237
No induction necessary
0.6 - 0.9 mil
Results 1 - 2 of 2
1
Military Coatings
MIL-PRF-23377D
, E & F Type I Class 1 Epoxy Primer
MIL-PRF-24635C
Silicone Alkyd Enamel
CS 3204
Aircraft Integral Fuel Tank Sealant
MIL-PRF-22750F
High Solids Epoxy Topcoat
MIL-P24441B
, Type III Epoxy Polyamide
MIL-PRF-24667B
High Solids Non-Slip Deck Coating Type I Comp G
MIL-24441
Type III Epoxy Polyamide
MIL-PRF-85285D
Ordnance High Solids Polyurethane, Type 2, Class H
Concrete Saver®
Anti-Slip Floor Coatings Heavy Vehicle Grade
AS9100
System
Light Gray Silicone Alkyd Enamel
, Type ll. Class 2, Grade B
MIL-PRF-85285D
Two Component Tan Flat High Solids Urethane Type II
AST Acme, Inc.
| 728 South 13th Street | Louisville, Kentucky, USA 40210
Phone: 502-583-8355 | Fax: 502-583-2290 | E-mail:
info
|
Privacy Policy
|
Site Map
